• Guangzhou Caijie Stage Lighting Equipment Co., Ltd.

    Contact: Mr. Xie: 13312833512
    Web: www.caijielight.com
    Add: No. 12, Qingfeng 2nd Road, Shijing Street, Baiyun

    District, Guangzhou

行业知识

Small problems and treatment of stage lighting


Small problems and treatment of stage lighting
时间:2021/6/24 16:54:29;点击:357
问题1:摇头灯开启后正常工作几十分钟就自动灭泡,怎么办?


解答:首先自行将灯的外壳全部打开,检查里面所有的风扇,可能就是某个风扇没有工作导致灭泡,如果风扇都正常就換一个点灯器试试,点灯器要是没有问题就再换一个灯泡试试,如果换了灯泡还是灭泡就换温控试试。灭泡主要原因可能就是风扇,点灯器,灯泡,温控这些东西坏了


问题2:摇头灯其他功能都正常就是XY轴动的时候咔咔响,好像有什么卡住了,怎么办?


解答:自行拆开外壳,看看灯的位置是否变形,变形了我们就看看把灯掰正,如県没有变形,检查主板到X轴,Y轴电机的线路和电机,正常的电机,在灯通电后我们用手去转动是比较吃力的,坏的电机我们用手去转动很轻松。电机和线路没问题就看看读数盘和光耦是否坏了,读数盘和光耦换了后要是还没解决问题就换主板


问题3:摇头灯其他功能正常,颜色或者图案不统一,怎么解決?



解答:打开灯外壳,检查主板到色盘或者图案盘之间的线路和电机,线路和电机要是没有问题就换一块主板试试,主板要是换了也没有那就换霍尔和磁铁


可题4:摇头灯其他正常就是关不了光,有漏光现像。怎么解决?


解答:先拆开外売,先看看是频闪关不了还是档光板关不了,如果是光匝,就先检查主板到光匝的线路和光匝电机,线降和电机要是没有问题就直接换主板


可题5:摇头灯其他功能正常,棱镜或者雾化打不出或者打一半,怎么解决?


解答:还是要先拆开灯壳检查线路和电机是否正常,线路和电机如果正常就是换主板了。



回题6:摇头灯通电后电源指示灯亮,其他没有任何反应,显示屏不亮,风扇不转,灯泡不亮。怎么办?


解答:打开底座,看看电源线路,线路没有问题就换一块电源。


可题7:摇头灯自走正常,但是不受控制,怎么办?



答:我们要先检查我们灯的地址码是不是设置好了,不同的控台播地址码不一样,如果地址码对了就检查一下信号线是不是好的,信号线如果是好的,就把灯底座打开看看里面信号接收的端口是不是有松动,或者直接换一个信号接收的端口,如果信号接收端口换了没有用的话就直接换主板。


回题8:帕灯有一组灯珠不亮,怎么办?



解答:打开帕灯,用万能表一个ー一个灯珠量一下,找到环死的灯珠,自己再焊上好的灯珠就行
Question 1: After the moving head light is turned on, it will automatically extinguish the bubble after tens of minutes of normal operation. What should I do?


Answer: First, open all the lamp shells by yourself and check all the fans inside.

It can be that a certain fan does not work and the bubble is extinguished. If the fan is normal, replace it.

Try the lighter. If there is no problem with the lighter, try another bulb. If

Try changing the temperature control after changing the bulb or extinguishing the bubble. The main reason for defoaming may be the fan

, Lighter, light bulb, temperature control these things are broken


Question 2: The other functions of the moving head light are normal, that is, when the XY axis moves, it clicks, it seems

What should I do if something is stuck?


Answer: Disassemble the shell by yourself to see if the position of the lamp is deformed, we will see if it is deformed

Check that the lights are turned on, and if there is no deformation, check the wiring from the main board to the X-axis and Y-axis motors.

The motor, the normal motor, it’s more difficult for us to turn the light by hand after the lamp is energized.

, The broken motor can be easily rotated by hand. Check the motor and circuit if there is no problem

Whether the reading plate and the optocoupler are broken, if the reading plate and the optocoupler are changed, if the problem is not solved yet

Change the motherboard



Question 3: Other functions of the moving head light are normal, and the color or pattern is not uniform, how to solve it?


Answer: Open the lamp housing and check the wiring and electrical connection between the main board and the color wheel or pattern plate.

If there is no problem with the machine, circuit and motor, try another motherboard. If the motherboard is replaced

If you don’t have it, then change the Hall and the magnet


Question 4: Other normal moving head lights can not turn off the light, there is light leakage. How to deal with it?


Answer: Open the outer wall first, and see if the strobe cannot be turned off or the light barrier cannot be turned off, such as

If it is a light turn, first check the circuit from the main board to the light turn and the light turn motor, wire drop and power

If there is no problem, just change the motherboard


Question 5: The other functions of the moving head light are normal, and the prism or fog can not be played or half of it

,How to deal with it?



Answer: It is still necessary to disassemble the lamp housing first to check whether the circuit and the motor are normal, the circuit and the motor

If it is normal, the motherboard is replaced.


Back to question 6: After the moving head light is powered on, the power indicator light is on, and there is no other response.

The screen does not light up, the fan does not turn, and the light bulb does not light up. How to do?



Answer: Open the base and look at the power line. If there is no problem with the line, change the power supply.



Question 7: The moving head light is normal, but it is not controlled. What should I do?


Answer: We must first check whether the address code of our lamp is set, different consoles

The broadcast address code is different. If the address code is correct, check if the signal line is good.

Yes, if the signal cable is good, open the base of the light to see the signal received inside

Is the port loose? Or directly change to a signal receiving port?

If the number of the receiving port is changed, if it is useless, change the motherboard directly.



Back to question 8: What should I do if there is a set of lamp beads of the par lamp that does not light up?


Solution: Turn on the par light, use a universal meter to measure one by one lamp bead, and find the dead ring

Lamp beads, just solder the good lamp beads yourself

Prev: is first Next: is last
Back
Links:

Home   |    About   |    Product   |    Case   |    News   |    Down   |    Contact   |   

Guangzhou Caijie Stage Lighting Equipment Co., Ltd.

关闭